Expressions
info
Apache Druid supports two query languages: native queries and Druid SQL. This document describes the native language. For information about functions available in SQL, refer to the SQL documentation.
Expressions are used in various places in the native query language, including virtual columns and join conditions. They are also generated by most Druid SQL functions during the query translation process.
Expressions are also used at ingestion time inside transformations.
This expression language supports the following operators (listed in decreasing order of precedence).
| Operators | Description |
|---|---|
| !, - | Unary NOT and Minus |
| ^ | Binary power op |
| *, /, % | Binary multiplicative |
| +, - | Binary additive |
| <, <=, >, >=, ==, != | Binary Comparison |
| &&, || | Binary Logical AND, OR |
Long, double, and string data types are supported. If a number contains a dot, it is interpreted as a double, otherwise it is interpreted as a long. That means, always add a '.' to your number if you want it interpreted as a double value. String literals should be quoted by single quotation marks.
Additionally, the expression language supports long, double, and string arrays. Array literals are created by wrapping square brackets around a list of scalar literals values delimited by a comma or space character. All values in an array literal must be the same type, however null values are accepted. Typed empty arrays may be defined by prefixing with their type in angle brackets: <STRING>[], <DOUBLE>[], or <LONG>[].
Expressions can contain variables. Variable names may contain letters, digits, '_' and '$'. Variable names must not begin with a digit. To escape other special characters, you can quote it with double quotation marks.
For logical operators, a number is true if and only if it is positive (0 or negative value means false). For string type, it's the evaluation result of 'Boolean.valueOf(string)'.
Multi-value string dimensions are supported and may be treated as either scalar or array typed values, as follows:
- When treated as a scalar type, the expression is automatically transformed so that the scalar operation is applied across all values of the multi-valued type, mimicking Druid's native behavior.
- Druid coerces values that result in arrays back into the native Druid string type for grouping and aggregation. Grouping on multi-value string dimensions in Druid groups by the individual values, not the 'array'. This behavior produces results similar to an implicit SQL
UNNESToperation. Alternatively, you can use thearray_to_stringfunction to perform the aggregation on a stringified version of the complete array and therefore preserve the complete row. To transform the stringified dimension back into the true native array type, usestring_to_arrayin an expression post-aggregator.
The following built-in functions are available.
General functions
| name | description |
|---|---|
| cast | cast(expr,LONG or DOUBLE or STRING or ARRAY<LONG>, or ARRAY<DOUBLE> or ARRAY<STRING>) returns expr with specified type. exception can be thrown. Scalar types may be cast to array types and will take the form of a single element list (null will still be null). |
| coalesce | coalesce(exprs) returns the first non-null expression, or null if all expressions are null. |
| if | if(predicate,then,else) returns 'then' if 'predicate' evaluates to a positive number, otherwise it returns 'else' |
| nvl | nvl(expr,expr-for-null) returns 'expr-for-null' if 'expr' is null. |
| like | like(expr, pattern[, escape]) is equivalent to SQL expr LIKE pattern |
| case_searched | case_searched(expr1, result1, [[expr2, result2, ...], else-result]) is similar to CASE WHEN expr1 THEN result1 [ELSE else_result] END in SQL |
| case_simple | case_simple(expr, value1, result1, [[value2, result2, ...], else-result]) is similar to CASE expr WHEN value THEN result [ELSE else_result] END in SQL |
| isnull | isnull(expr) returns 1 if the value is null, else 0 |
| notnull | notnull(expr) returns 1 if the value is not null, else 0 |
| bloom_filter_test | bloom_filter_test(expr, filter) tests the value of 'expr' against 'filter', a bloom filter serialized as a base64 string. See bloom filter extension documentation for additional details. |
String functions
| name | description |
|---|---|
| concat | concat(expr, expr...) concatenate a list of strings |
| format | format(pattern[, args...]) returns a string formatted in the manner of Java's String.format. |
| like | like(expr, pattern[, escape]) is equivalent to SQL expr LIKE pattern |
| lookup | lookup(expr, lookup-name[,replaceMissingValueWith]) looks up expr in a registered,replaceMissingValueWith is an optional constant string query-time lookup |
| parse_long | parse_long(string[, radix]) parses a string as a long with the given radix, or 10 (decimal) if a radix is not provided. |
| regexp_extract | regexp_extract(expr, pattern[, index]) applies a regular expression pattern and extracts a capture group index, or null if there is no match. If index is unspecified or zero, returns the substring that matched the pattern. The pattern may match anywhere inside expr; if you want to match the entire string instead, use the ^ and $ markers at the start and end of your pattern. |
| regexp_like | regexp_like(expr, pattern) returns whether expr matches regular expression pattern. The pattern may match anywhere inside expr; if you want to match the entire string instead, use the ^ and $ markers at the start and end of your pattern. |
| regexp_replace | regexp_replace(expr, pattern, replacement) replaces all instances of a regular expression pattern with a given replacement string. The pattern may match anywhere inside expr; if you want to match the entire string instead, use the ^ and $ markers at the start and end of your pattern. |
| contains_string | contains_string(expr, string) returns whether expr contains string as a substring. This method is case-sensitive. |
| icontains_string | contains_string(expr, string) returns whether expr contains string as a substring. This method is case-insensitive. |
| replace | replace(expr, pattern, replacement) replaces pattern with replacement |
| substring | substring(expr, index, length) behaves like java.lang.String's substring |
| right | right(expr, length) returns the rightmost length characters from a string |
| left | left(expr, length) returns the leftmost length characters from a string |
| strlen | strlen(expr) returns length of a string in UTF-16 code units |
| strpos | strpos(haystack, needle[, fromIndex]) returns the position of the needle within the haystack, with indexes starting from 0. The search will begin at fromIndex, or 0 if fromIndex is not specified. If the needle is not found then the function returns -1. |
| trim | trim(expr[, chars]) remove leading and trailing characters from expr if they are present in chars. chars defaults to ' ' (space) if not provided. |
| ltrim | ltrim(expr[, chars]) remove leading characters from expr if they are present in chars. chars defaults to ' ' (space) if not provided. |
| rtrim | rtrim(expr[, chars]) remove trailing characters from expr if they are present in chars. chars defaults to ' ' (space) if not provided. |
| lower | lower(expr) converts a string to lowercase |
| upper | upper(expr) converts a string to uppercase |
| reverse | reverse(expr) reverses a string |
| repeat | repeat(expr, N) repeats a string N times |
| lpad | lpad(expr, length, chars) returns a string of length from expr left-padded with chars. If length is shorter than the length of expr, the result is expr which is truncated to length. The result will be null if either expr or chars is null. If chars is an empty string, no padding is added, however expr may be trimmed if necessary. |
| rpad | rpad(expr, length, chars) returns a string of length from expr right-padded with chars. If length is shorter than the length of expr, the result is expr which is truncated to length. The result will be null if either expr or chars is null. If chars is an empty string, no padding is added, however expr may be trimmed if necessary. |
Time functions
| name | description |
|---|---|
| timestamp | timestamp(expr[,format-string]) parses string expr into date then returns milliseconds from java epoch. without 'format-string' it's regarded as ISO datetime format |
| unix_timestamp | same with 'timestamp' function but returns seconds instead |
| timestamp_ceil | timestamp_ceil(expr, period, [origin, [timezone]]) rounds up a timestamp, returning it as a new timestamp. Period can be any ISO8601 period, like P3M (quarters) or PT12H (half-days). The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". |
| timestamp_floor | timestamp_floor(expr, period, [origin, [timezone]]) rounds down a timestamp, returning it as a new timestamp. Period can be any ISO8601 period, like P3M (quarters) or PT12H (half-days). The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". |
| timestamp_shift | timestamp_shift(expr, period, step, [timezone]) shifts a timestamp by a period (step times), returning it as a new timestamp. Period can be any ISO8601 period. Step may be negative. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". |
| timestamp_extract | timestamp_extract(expr, unit, [timezone]) extracts a time part from expr, returning it as a number. Unit can be EPOCH (number of seconds since 1970-01-01 00:00:00 UTC), SECOND, MINUTE, HOUR, DAY (day of month), DOW (day of week), DOY (day of year), WEEK (week of week year), MONTH (1 through 12), QUARTER (1 through 4), or YEAR. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00" |
| timestamp_parse | timestamp_parse(string expr, [pattern, [timezone]]) parses a string into a timestamp using a given Joda DateTimeFormat pattern. If the pattern is not provided, this parses time strings in either ISO8601 or SQL format. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00", and will be used as the time zone for strings that do not include a time zone offset. Pattern and time zone must be literals. Strings that cannot be parsed as timestamps will be returned as nulls. |
| timestamp_format | timestamp_format(expr, [pattern, [timezone]]) formats a timestamp as a string with a given Joda DateTimeFormat pattern, or ISO8601 if the pattern is not provided. The time zone, if provided, should be a time zone name like "America/Los_Angeles" or offset like "-08:00". Pattern and time zone must be literals. |
Math functions
See javadoc of java.lang.Math for detailed explanation for each function.
| name | description |
|---|---|
| abs | abs(x) returns the absolute value of x |
| acos | acos(x) returns the arc cosine of x |
| asin | asin(x) returns the arc sine of x |
| atan | atan(x) returns the arc tangent of x |
| bitwiseAnd | bitwiseAnd(x,y) returns the result of x & y. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| bitwiseComplement | bitwiseComplement(x) returns the result of ~x. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| bitwiseConvertDoubleToLongBits | bitwiseConvertDoubleToLongBits(x) converts the bits of an IEEE 754 floating-point double value to a long. If the input is not a double, it is implicitly cast to a double prior to conversion |
| bitwiseConvertLongBitsToDouble | bitwiseConvertLongBitsToDouble(x) converts a long to the IEEE 754 floating-point double specified by the bits stored in the long. If the input is not a long, it is implicitly cast to a long prior to conversion |
| bitwiseOr | bitwiseOr(x,y) returns the result of x [PIPE] y. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| bitwiseShiftLeft | bitwiseShiftLeft(x,y) returns the result of x << y. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| bitwiseShiftRight | bitwiseShiftRight(x,y) returns the result of x >> y. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| bitwiseXor | bitwiseXor(x,y) returns the result of x ^ y. Double values will be implicitly cast to longs, use bitwiseConvertDoubleToLongBits to perform bitwise operations directly with doubles |
| atan2 | atan2(y, x) returns the angle theta from the conversion of rectangular coordinates (x, y) to polar * coordinates (r, theta) |
| cbrt | cbrt(x) returns the cube root of x |
| ceil | ceil(x) returns the smallest (closest to negative infinity) double value that is greater than or equal to x and is equal to a mathematical integer |
| copysign | copysign(x) returns the first floating-point argument with the sign of the second floating-point argument |
| cos | cos(x) returns the trigonometric cosine of x |
| cosh | cosh(x) returns the hyperbolic cosine of x |
| cot | cot(x) returns the trigonometric cotangent of an angle x |
| div | div(x,y) is integer division of x by y |
| exp | exp(x) returns Euler's number raised to the power of x |
| expm1 | expm1(x) returns e^x-1 |
| floor | floor(x) returns the largest (closest to positive infinity) double value that is less than or equal to x and is equal to a mathematical integer |
| getExponent | getExponent(x) returns the unbiased exponent used in the representation of x |
| hypot | hypot(x, y) returns sqrt(x^2+y^2) without intermediate overflow or underflow |
| log | log(x) returns the natural logarithm of x |
| log10 | log10(x) returns the base 10 logarithm of x |
| log1p | log1p(x) will the natural logarithm of x + 1 |
| max | max(x, y) returns the greater of two values |
| min | min(x, y) returns the smaller of two values |
| nextafter | nextafter(x, y) returns the floating-point number adjacent to the x in the direction of the y |
| nextUp | nextUp(x) returns the floating-point value adjacent to x in the direction of positive infinity |
| pi | pi returns the constant value of the π |
| pow | pow(x, y) returns the value of the x raised to the power of y |
| remainder | remainder(x, y) returns the remainder operation on two arguments as prescribed by the IEEE 754 standard |
| rint | rint(x) returns value that is closest in value to x and is equal to a mathematical integer |
| round | round(x, y) returns the value of the x rounded to the y decimal places. While x can be an integer or floating-point number, y must be an integer. The type of the return value is specified by that of x. y defaults to 0 if omitted. When y is negative, x is rounded on the left side of the y decimal points. If x is NaN, x returns 0. If x is infinity, x will be converted to the nearest finite double. |
| safe_divide | safe_divide(x,y) returns the division of x by y if y is not equal to 0. In case y is 0 it returns null or 0 if druid.generic.useDefaultValueForNull=true (legacy mode) |
| scalb | scalb(d, sf) returns d * 2^sf rounded as if performed by a single correctly rounded floating-point multiply to a member of the double value set |
| signum | signum(x) returns the signum function of the argument x |
| sin | sin(x) returns the trigonometric sine of an angle x |
| sinh | sinh(x) returns the hyperbolic sine of x |
| sqrt | sqrt(x) returns the correctly rounded positive square root of x |
| tan | tan(x) returns the trigonometric tangent of an angle x |
| tanh | tanh(x) returns the hyperbolic tangent of x |
| todegrees | todegrees(x) converts an angle measured in radians to an approximately equivalent angle measured in degrees |
| toradians | toradians(x) converts an angle measured in degrees to an approximately equivalent angle measured in radians |
| ulp | ulp(x) returns the size of an ulp of the argument x |
Array functions
| function | description |
|---|---|
| array(expr1,expr ...) | constructs an array from the expression arguments, using the type of the first argument as the output array type |
| array_length(arr) | returns length of array expression |
| array_offset(arr,long) | returns the array element at the 0 based index supplied, or null for an out of range index |
| array_ordinal(arr,long) | returns the array element at the 1 based index supplied, or null for an out of range index |
| array_contains(arr,expr) | returns 1 if the array contains the element specified by expr, or contains all elements specified by expr if expr is an array, else 0 |
| array_overlap(arr1,arr2) | returns 1 if arr1 and arr2 have any elements in common, else 0 |
| scalar_in_array(expr, arr) | returns 1 if the scalar is present in the array, else 0 if the expr is non-null, or null if the expr is null |
| array_offset_of(arr,expr) | returns the 0 based index of the first occurrence of expr in the array, or null or -1 if druid.generic.useDefaultValueForNull=true (deprecated legacy mode) if no matching elements exist in the array. |
| array_ordinal_of(arr,expr) | returns the 1 based index of the first occurrence of expr in the array, or null or -1 if druid.generic.useDefaultValueForNull=true (deprecated legacy mode) if no matching elements exist in the array. |
| array_prepend(expr,arr) | adds expr to arr at the beginning, the resulting array type determined by the type of the array |
| array_append(arr,expr) | appends expr to arr, the resulting array type determined by the type of the first array |
| array_concat(arr1,arr2) | concatenates 2 arrays, the resulting array type determined by the type of the first array |
| array_set_add(arr,expr) | adds expr to arr and converts the array to a new array composed of the unique set of elements. The resulting array type determined by the type of the array |
| array_set_add_all(arr1,arr2) | combines the unique set of elements of 2 arrays, the resulting array type determined by the type of the first array |
| array_slice(arr,start,end) | return the subarray of arr from the 0 based index start(inclusive) to end(exclusive), or null, if start is less than 0, greater than length of arr or less than end |
| array_to_string(arr,str) | joins all elements of arr by the delimiter specified by str |
| string_to_array(str1,str2) | splits str1 into an array on the delimiter specified by str2, which is a regular expression |
Apply functions
Apply functions allow for special 'lambda' expressions to be defined and applied to array inputs to enable free-form transformations.
| function | description |
|---|---|
| map(lambda,arr) | applies a transform specified by a single argument lambda expression to all elements of arr, returning a new array |
| cartesian_map(lambda,arr1,arr2,...) | applies a transform specified by a multi argument lambda expression to all elements of the Cartesian product of all input arrays, returning a new array; the number of lambda arguments and array inputs must be the same |
| filter(lambda,arr) | filters arr by a single argument lambda, returning a new array with all matching elements, or null if no elements match |
| fold(lambda,arr,acc) | folds a 2 argument lambda across arr using acc as the initial input value. The first argument of the lambda is the array element and the second the accumulator, returning a single accumulated value. |
| cartesian_fold(lambda,arr1,arr2,...,acc) | folds a multi argument lambda across the Cartesian product of all input arrays using acc as the initial input value. The first arguments of the lambda are the array elements of each array and the last is the accumulator, returning a single accumulated value. |
| any(lambda,arr) | returns 1 if any element in the array matches the lambda expression, else 0 |
| all(lambda,arr) | returns 1 if all elements in the array matches the lambda expression, else 0 |
Lambda expressions syntax
Lambda expressions are a sort of function definition, where new identifiers can be defined and passed as input to the expression body
(identifier1 ...) -> expr
e.g.
(x, y) -> x + y
The identifier arguments of a lambda expression correspond to the elements of the array it is being applied to. For example:
map((x) -> x + 1, some_multi_value_column)
will map each element of some_multi_value_column to the identifier x so that the lambda expression body can be evaluated for each x. The scoping rules are that lambda arguments will override identifiers which are defined externally from the lambda expression body. Using the same example:
map((x) -> x + 1, x)
in this case, the x when evaluating x + 1 is the lambda argument, thus an element of the multi-valued column x, rather than the column x itself.
JSON functions
JSON functions provide facilities to extract, transform, and create COMPLEX<json> values.
| function | description |
|---|---|
| json_value(expr, path[, type]) | Extract a Druid literal (STRING, LONG, DOUBLE, ARRAY<STRING>, ARRAY<LONG>, or ARRAY<DOUBLE>) value from expr using JSONPath syntax of path. The optional type argument can be set to 'LONG','DOUBLE', 'STRING', 'ARRAY<LONG>', 'ARRAY<DOUBLE>', or 'ARRAY<STRING>' to cast values to that type. |
| json_query(expr, path) | Extract a COMPLEX<json> value from expr using JSONPath syntax of path |
| json_query_array(expr, path) | Extract an ARRAY<COMPLEX<json>> value from expr using JSONPath syntax of path. If value is not an ARRAY, it gets translated into a single element ARRAY containing the value at path. The primary use of this function is to extract arrays of objects to use as inputs to other array functions. |
| json_object(expr1, expr2[, expr3, expr4 ...]) | Construct a COMPLEX<json> with alternating 'key' and 'value' arguments |
| parse_json(expr) | Deserialize a JSON STRING into a COMPLEX<json>. If the input is not a STRING or it is invalid JSON, this function will result in an error. |
| try_parse_json(expr) | Deserialize a JSON STRING into a COMPLEX<json>. If the input is not a STRING or it is invalid JSON, this function will result in a NULL value. |
| to_json_string(expr) | Convert expr into a JSON STRING value |
| json_keys(expr, path) | Get array of field names from expr at the specified JSONPath path, or null if the data does not exist or have any fields |
| json_paths(expr) | Get array of all JSONPath paths available from expr |
JSONPath syntax
Druid supports a small, simplified subset of the JSONPath syntax operators, primarily limited to extracting individual values from nested data structures.
| Operator | Description |
|---|---|
$ | Root element. All JSONPath expressions start with this operator. |
.<name> | Child element in dot notation. |
['<name>'] | Child element in bracket notation. |
[<number>] | Array index. |
See SQL JSON documentation for examples and Nested columns for more information on ingesting and storing nested data.
Reduction functions
Reduction functions operate on zero or more expressions and return a single expression. If no expressions are passed as
arguments, then the result is NULL. The expressions must all be convertible to a common data type, which will be the
type of the result:
- If all arguments are
NULL, the result isNULL. Otherwise,NULLarguments are ignored. - If the arguments comprise a mix of numbers and strings, the arguments are interpreted as strings.
- If all arguments are integer numbers, the arguments are interpreted as longs.
- If all arguments are numbers and at least one argument is a double, the arguments are interpreted as doubles.
| function | description |
|---|---|
| greatest([expr1, ...]) | Evaluates zero or more expressions and returns the maximum value based on comparisons as described above. |
| least([expr1, ...]) | Evaluates zero or more expressions and returns the minimum value based on comparisons as described above. |
IP address functions
For the IPv4 address functions, the address argument accepts either an IPv4 dotted-decimal string (e.g. "192.168.0.1") or an IP address represented as a long (e.g. 3232235521). Format the subnet argument as an IPv4 address subnet in CIDR notation (e.g. "192.168.0.0/16").
For the IPv6 address function, the address argument accepts a semicolon separated string (e.g. "75e9:efa4:29c6:85f6::232c"). The format of the subnet argument should be an IPv6 address subnet in CIDR notation (e.g. "75e9:efa4:29c6:85f6::/64").
| function | description |
|---|---|
| ipv4_match(address, subnet) | Returns 1 if the IPv4 address belongs to the subnet literal, else 0. If address is not a valid IPv4 address, then 0 is returned. This function is more efficient if address is a long instead of a string. |
| ipv4_parse(address) | Parses address into an IPv4 address stored as a long. Returns address if it is already a valid IPv4 integer address. Returns null if address cannot be represented as an IPv4 address. |
| ipv4_stringify(address) | Converts address into an IPv4 address dotted-decimal string. Returns address if it is already a valid IPv4 dotted-decimal string. Returns null if address cannot be represented as an IPv4 address. |
| ipv6_match(address, subnet) | Returns 1 if the IPv6 address belongs to the subnet literal, else 0. If address is not a valid IPv6 address, then 0 is returned. |
Other functions
| function | description |
|---|---|
| human_readable_binary_byte_format(value[, precision]) | Format a number in human-readable IEC format. precision must be in the range of [0,3] (default: 2). For example:1.00 MiB1.000 MiB |
| human_readable_decimal_byte_format(value[, precision]) | Format a number in human-readable SI format. precision must be in the range of [0,3] (default: 2). For example:1.00 MB1.000 MB |
| human_readable_decimal_format(value[, precision]) | Format a number in human-readable SI format. precision must be in the range of [0,3] (default: 2). For example:1.00 M1.000 M |
Vectorization support
A number of expressions support 'vectorized' query engines
Supported features:
- constants and identifiers are supported for any column type
castis supported for numeric and string types- math operators:
+,-,*,/,%,^are supported for numeric types - logical operators:
!,&&,||, are supported for string and numeric types - comparison operators:
=,!=,>,>=,<,<=are supported for string and numeric types - math functions:
abs,acos,asin,atan,cbrt,ceil,cos,cosh,cot,exp,expm1,floor,getExponent,log,log10,log1p,nextUp,rint,signum,sin,sinh,sqrt,tan,tanh,toDegrees,toRadians,ulp,atan2,copySign,div,hypot,max,min,nextAfter,pow,remainder,scalbare supported for numeric types - time functions:
timestamp_floor(with constant granularity argument) is supported for numeric types - boolean functions:
isnull,notnullare supported for string and numeric types - conditional functions:
nvlis supported for string and numeric types - string functions: the concatenation operator (
+) andconcatfunction are supported for string and numeric types - other:
parse_longis supported for numeric and string types
Logical operator modes
In Druid 28.0 and later, druid.expressions.useStrictBooleans=true is set by default. Logical operations treat null values as "unknown" for SQL compatible behavior. All boolean output functions will output 'homogeneous' LONG typed boolean values of 1 for true and 0 for false.
For the "or" operator:
true || null,null || true, ->1false || null,null || false,null || null->null
For the "and" operator:
true && null,null && true,null && null->nullfalse && null,null && false->0
Druid currently still retains implicit conversion of LONG, DOUBLE, and STRING types into boolean values in both modes:
LONGorDOUBLE: any value greater than 0 is consideredtrue, elsefalse.STRING: the value'true'(case insensitive) is consideredtrue, everything else isfalse.
SQL compatible behavior:
100 && 11->10.7 || 0.3->1100 && 0->0'troo' && 'true'->0'troo' || 'true'->1
Prior to Druid 28.0.0, druid.expressions.useStrictBooleans=false was the default. In this mode, boolean function expressions have inconsistent handling of true and false values. The logical 'and' and 'or' operators behave in a manner that is incompatible with SQL, even if SQL compatible null handling mode (druid.generic.useDefaultValueForNull=false) is enabled. Logical operators also pass through their input values, similar to many scripting languages, and treat null as false, which results in some rather strange behavior. Other boolean operations, such as comparisons and equality, retain their input types (e.g. DOUBLE comparison produces 1.0 for true and 0.0 for false), while many other boolean functions strictly produce LONG typed values of 1 for true and 0 for false. This legacy mode can still be enabled by setting druid.expressions.useStrictBooleans=false.
Legacy behavior:
100 && 11->110.7 || 0.3->0.3100 && 0->0'troo' && 'true'->'troo''troo' || 'true'->'true'